Build a robot as simply
as building a website.
Describe what you want to build. ORIN designs the parts, generates the CAD, and helps you build and debug the real thing — not just the code.
Most AI builders debug your code; ORIN helps you debug your hardware too.
Orin Debugs Hardware
Stuck with a sensor that won't read, a motor that won't move, or wiring that looks wrong? Orin combines your photo, error log, and board details into one specific diagnosis.
Build with Guidance
Want to build a mobile robot or a sensor project? Orin tells you which components you need, how to connect them, and what each part actually does.
Real Code, Real Files
Orin writes ready-to-use firmware and sketches, saves them in your project files, and explains the code so you can change it with confidence.
Three steps from stuck to running.
No generic chatbot answers. Orin looks at the actual signal you give it — your log, your photo, your board — and returns a fix you can use.
01 — Paste your logs or code
Drop in compiler errors, serial output, or the sketch that won't compile.
02 — Upload a photo of your setup
A wiring photo is usually enough. Orin spots missed connections, wrong pins, and power problems.
03 — Get a specific diagnosis and fix
Orin explains the root cause, corrects the wiring or code, and writes the file you can upload straight to your board.
Upload a photo. Paste the error. Get the fix.
Orin reads your wiring, your serial log, and your board details together. It points out exactly what is wrong and what to change next.
- 01Wiring diagnosis from photos
- 02Error log analysis
- 03Pin and power checks
- 04Sensor and actuator debugging
- 05Component mismatch detection
- 06Step-by-step correction guide
Build a robot with the right parts and a clear plan.
Tell Orin what you want to make — a mobile robot, a sensor logger, a motor controller — and it gives you a component list, wiring map, and instructions.
- 01Component recommendations
- 02Wiring diagrams
- 03Microcontroller selection
- 04Sensor and motor matching
- 05Power and safety checks
- 06Project scoping guidance
Generate real code you can run on your board.
Orin writes working sketches and firmware in your project files, explains the important parts, and fixes the code when your board disagrees.
- 01Arduino and ESP32 sketches
- 02Sensor read/write code
- 03Motor control logic
- 04Protocol setup (I2C, SPI, UART)
- 05Code saved in your project files
- 06One-click corrections after errors
Bring your robot online. See it move. Control it.
Connect your board to OrinLink and watch live telemetry — sensor values, motor state, movement — and send commands back from the same workspace.
- 01Live telemetry dashboard
- 02Real-time sensor readings
- 03Motor and movement state
- 04Remote commands
- 05Device status monitoring
- 06Project-linked hardware sessions
Built to reason about hardware, not just answer questions.
Orin is the engineering intelligence inside OrinLink. It understands boards, wiring, firmware, sensors, and actuators together — so it can debug real projects instead of guessing from a prompt.
- Arduino & ESP32orin
- Sensors & actuatorsorin
- Motor driversorin
- Communication protocolsorin
- Microcontrollersorin
- Wiring & powerorin
- Firmware errorsorin
- Serial debuggingorin
- I2C / SPI / UARTorin
- PWM & timingorin
- ROS basicsorin
- Mobile robotsorin
- Computer visionorin
- PCB layout revieworin
- BOM & componentsorin
- Telemetry & controlorin
Help anyone build and fix real robots and embedded projects with an AI that understands the hardware in front of them.
Start debugging today.
Sign in and try a debug session. Build a robot, fix a sensor, or generate firmware for your board. No waitlist, no access request.